Wind Energy
As wind energy takes a front seat in the renewable sector, reliable climate control becomes essential. Industrial’s dehumidifiers are there to protect sensitive equipment from the corrosive effects of moisture.
Industrial dehumidifiers from Reinders Industrial
Adsorption Dehumidifier Bulk Solids – Adsorption dehumidifiers
Small, light and robust – The offered series of adsorption dryers consists of several small, lightweight, energy-efficient models specifically designed to help users address smaller or temporary solutions.
The dehumidifiers have standard stainless steel housings for ruggedness and use one fan for both process air and regeneration air.View product
- Process air 150 – 400 m³/h
- Dehumidification capacity up to 1,5 kg/u
- 480 mm x 420 mm x 415 mm
The dehumidifiers have standard stainless steel housings for ruggedness and use one fan for both process air and regeneration air.View product
Adsorption Dehumidifier 500 – Adsorption dehumidifiers
As standard, this air dryer is equipped with a robust stainless steel housing, optionally equipped with energy-efficient EC fans of high quality and low energy consumption.
The air dryer requires very little service, nevertheless, the air dryer is designed to be easily accessible so that the various components can be adequately checked and, if necessary, replaced quickly. View product
- Process air 150 – 500 m³/h
- Dehumidification capacity up to 6 kg/u
- 540 mm x 760 mm x 1100 mm
The air dryer requires very little service, nevertheless, the air dryer is designed to be easily accessible so that the various components can be adequately checked and, if necessary, replaced quickly. View product
Adsorption Dehumidifier 1000 – Adsorption dehumidifiers
As standard, this dryer is equipped with a robust stainless steel housing, optionally equipped with energy-efficient EC fans of high quality and low energy consumption.
Very low maintenance requirements, easily expandable with heat recovery or cooling/heating water blocks for optimal control of process air temperature.View product
- Process air 500 – 1000 m³/h
- Dehumidification capacity up to 6 kg/u
- 540 mm x 760 mm x 1100 mm
Very low maintenance requirements, easily expandable with heat recovery or cooling/heating water blocks for optimal control of process air temperature.View product
Adsorption Dehumidifier 4000 – Adsorption dehumidifiers
As standard, the adsorption dryer 4000 is equipped with a robust stainless steel housing, optionally equipped with energy-efficient EC fans of high quality and low energy consumption.
It is a complete unit with a rotor, a transmission motor, fans, a heater, air filters and an integrated electrical system with all components necessary for safe operation. View product
- Process air 1000 – 4000 m³/h
- Dehumidification capacity up to 20 kg/u
- 825 mm x 1640 mm x 1725 mm
It is a complete unit with a rotor, a transmission motor, fans, a heater, air filters and an integrated electrical system with all components necessary for safe operation. View product
Adsorption Dehumidifier 10.000 – Adsorption dehumidifiers
The adsorption dryer 10,000 is the largest “standard” dryer in the range. Equipped with energy efficient EC fans of high quality and low energy consumption.
The adsorption dryer 10,000 has a moisture removal capacity of 25 liters to more than 60 liters per hour.View product
- Process air 4000 – 10.000 m³/h
- Dehumidification capacity up to 60 kg/u
- 2080 mm x 1360 mm x 2160 mm
The adsorption dryer 10,000 has a moisture removal capacity of 25 liters to more than 60 liters per hour.View product
Condensation Dehumidifier (Custom) – Condensation dehumidifiers
The condensation dehumidifier achieves very low humidity levels, with the dehumidifier optimized to minimize energy consumption. The dehumidifier is particularly energetically efficient in very hot and humid air that condenses easily. View product
Hybrid Dehumidifier (Custom) – Hybrid dehumidifiers
The hybrid dehumidifier is excellent for processes with maximum drying temperatures. The dehumidifier has more residual heat than condenser heat alone and is fully optimized for minimum energy consumption.
The cabinet consists of a robust steel frame with aluminum cabinet profiles. In which the double-walled and insulated panels are made of galvanized and powder-coated sheets. The hybrid dehumidifier is equipped with class EU7 bag filters to protect internal components and prevent rapid fouling of the rotor keeping the drying capacity intact. View product
The cabinet consists of a robust steel frame with aluminum cabinet profiles. In which the double-walled and insulated panels are made of galvanized and powder-coated sheets. The hybrid dehumidifier is equipped with class EU7 bag filters to protect internal components and prevent rapid fouling of the rotor keeping the drying capacity intact. View product
Request advice
Or give us a call…
