Adsorption Dehumidifier
Adsorption Dehumidifier 100
As standard, this air dryer is equipped with a robust stainless steel housing suitable for indoor installation, optionally equipped with energy-efficient EC fans of high quality and low energy consumption.
- Process air 100 – 150 m³/h
- Dehumidification capacity up to 1,5 kg/u
- 280 mm x 370 mm x 520 mm
Due to its modular design, the air dryer can be suitably expanded with heat recovery on the regeneration side or with air cooling, without refrigerant and F gases, so that no regeneration air duct is required at all. Ideal if there is no possibility for regeneration.
Download brochure Get in contactFeatures
- Reliable operation
Quality units developed by the world’s leading experts in the field. - Robust & resilient
Designed to withstand constant use. Standard stainless steel housing ensures robust and hygienic performance. - Full control
Wide range of controls and sensors to control both humidity and dew point. The dryer can be interfaced with all external controller types. - Easy to maintain
Designed for easy access, therefore easy and inexpensive to maintain. - Easy to operate
By appropriate microprocessor-controlled design with advanced sensors, tailored to your special requirements. Energy efficient Designed to consume as little energy as possible but also achieve maximum effect. - Low operating costs
Long service life and remarkably inexpensive to operate. Very easy installation Place, connect and plug in.
Specs
| Process air | 100 – 150 m³/h |
| Dehumidification capacity | up to 1.5 kg/h |
| Electrical connection power | 0.95 kW |
| Connection voltage | 220 – 230 / 1 V / Ph+N+PE |
| Dimensions W x L x H | 280 mm x 370 mm x 520 mm |
| Weight | 21 kg |
Air cooling
The air dryer can be equipped with air cooling, this eliminates the need for a regeneration air duct to the outside and therefore no wall or roof penetration to the outside. The dryer is equipped with an hour meter and a connection plug for adequate connection of the humidity control.
